Plastic housing with spike and prisms in 12.7 mm and 17.5 mm
With the mini prisms RSMP10 and RSMP12, surveyors can easily take measurements in cracks, gaps, and corners. Fixed dimensions give the surveyor the exact path from the point of measurement to the base of the housing or the tip of the spike.
In forensics, the prisms are used for the exact surveying of bullet holes.
On façades, historical buildings, supports, and many other objects, monitoring is possible with measuring points that are barely identifiable to the general public.
On concrete or masonry objects, small holes can be drilled to countersink the prisms flush with the surface.
To guarantee precise measurements, the sighting angle should be no more than 25°.
The ranges are dependent on the device and can be adversely affected by weather and environmental conditions.
- RSMP10 with 12.7 mm mini prism: Offset: -5.6 for Leica: +28.8 Â
- RSMP12 with 17.5 mm mini prism: Offset: -5.4 for Leica: +29.0
NOTE: For precise measurements, the prism must be directly aligned with the surveying instrument. When using the mini prisms for surveying settlement, the spikes can be removed and the prisms can be inserted or glued into the smallest cracks or gaps.
Please Note that due to Manufacturer Requirements this product has a Minimum Order Quantity (MOQ)
If you have questions or concerns regarding these MOQ numbers, please
contact us for more information.
