QUICKSTARTS & TUTORIALS

Leica Viva GNSS/Total Station Support

*Now with NEW updates from December 2015* Detailed guides & tutorials regarding general use, specific Smartworx software, and connectivity with other devices.

READ MORE

Tutorial: Upgrading Firmware and Measurement Engine for Leica 1200 Series GNSS Receivers

Starting GPS week 1803 (July 27th 2014 0:00 GPS time) GPS and GPS+ GLONASS receivers with ME Generation 3 (ME3 & ME3GG) and still using measurement FW lower than version 3.822 will stop tracking satellites and/or provide any position information. In order to avoid interruption in service, we advise the following methods for installation of ME firmware updates on your 1200 Series receivers.

The process is divided into 5 sections: checking and collecting required information and files for upgrading your receiver; backing up your receiver and controller configuration and data; preparing your receiver for system upgrades; installing license information, firmware and applications; and restoring configuration and data

READ MORE

Tutorial: Upgrading Firmware and Measurement Engine for Leica CS09/GS09 Series GNSS Receivers

This guide walks the user through the process of upgrading your system firmware on Leica CS09/GS09 GNSS receivers. The process is divided into 5 sections: checking and collecting required information and files for upgrading your receiver; backing up you receiver and controller configuration and data; preparing your receiver for system upgrades; installing license information, firmware and applications; and restoring configuration and data

READ MORE

Tutorial: Using the Tap-Map & DXF files in SmartWorx Viva v4.60

This tutorial will walk through the functionality of the tap-map in SmartWorx Viva. The tap-map was introduced in Leica SmartWorx Viva 4.0 and allows the surveyor to work with applications through a graphical, map-based interface.

READ MORE

Leica Geo Office Tutorial: Using SmartWorx Viva, CSRS-PPP & Geo Office

This tutorial provides an overview of the process involved in working with a Leica Viva Base & Rover on an arbitrary datum, then later updating the coordinates of the base and rover onto a predefined datum using PPP and Leica Geo Office.

READ MORE

Leica Flexline TS02/06/09 Support

Detailed guides & tutorials regarding use of the Flexline series of Total Stations.

READ MORE

Leica System 1200 GNSS/Total Station Support

Detailed guides & tutorials regarding general use, specific Smartworx software, and connectivity with other devices.

READ MORE
Page 1 of 212

Office Locations

Calgary Office
#2, 21 Highfield Circle SE
Calgary, Alberta
T2G 5N6
Phone: (403) 252-0070
Fax: (403) 259-3992
Driving Directions

Edmonton Office
16304 111 Avenue
Edmonton, Alberta
T5M 4G3
Phone: (780) 486-2111
Fax: (780) 486-2155
Driving Directions

Vancouver Office
#10, 3671 Viking Way
Richmond, BC
V6V-2J5
Phone: (604) 214-9453
Fax: (604) 214-9455
Driving Directions

Prince George
Parker Adams
Phone: (250) 961-9664

Tech Support: 1 (855) 414-9453

General: 1 (877) 252-0070

Email:info@spatialtechnologies.ca

Contact us for more information